Hisense TV Red Light Blinks 9 Times [Easy To Fix, Proven]

As someone who has faced the issue of his Hisense TV blinking nine times, I understand the stress that comes with it. 

I was left at a loss for what was wrong with my TV when it started blinking red lights, and doing research only added to the confusion. 

However, I managed to fix this problem independently with determination and persistence. 

In this article, I will share my experience and provide a step-by-step guide on how you can resolve the red light blinking situation in your Hisense TV. 

Depending on your Hisense TV’s issue, it will have a red light that flashes nine times. The flashing red lights indicates an issue with your television, and it may not start properly.

 Hisense has inbuilt error codes only for their televisions which can be caused by many factors like defective power supply, damaged main board, or faulty firmware. 

To fix the problem, you need to find out what went wrong and how to rectify it. 

Whether you are a DIY repair enthusiast or just want their television back up and running quickly, diagnosing why your Hisense TV is blinking nine times and fixing it yourself requires patience and the necessary tools.

Step By Step Process To Fix This Problem:

1- Power Cycle Your Hisense TV

2- Tighten Loose Connections

3- Use Different HDMI Cable

4- Use Different Power Cable

5- Update Your TV’s Firmware

6- Change HDMI Port

7- Disable HDR Setting

8- Bad Power Supply or Capacitors 

9- How to Contact Hisense for Warranty Claims

Hisense TV Red Light Blinks 9 Times [Easy To Fix, Proven]

How to fix Hisense TV Red Light Blinks 9 Times?

1- Power Cycle Your Hisense TV

A blinking red light on your Hisense TV that blinks nine times clearly indicates a problem. 

The most common cause of this issue is the overuse of your television. 

When you use your TV for an extended period, components inside may start to overheat, leading to performance issues and even permanent damage if not dealt with in time. 

If there are problems with your Hisense TV, the first step in resolving them is always performing a power cycle. 

Unplugging your television from the power source for at least 60 seconds before plugging it back in will reset the device and solve any issues caused by excessive use.

Follow these steps to perform a power cycle:

  • Unplug your TV from the electrical outlet.
  • Wait for at least 60 seconds.
  • Plug your TV back in.

If the red light blinks nine times, the issue persists; you may have to try a more detailed solution, like a factory reset. 

After holding the reset button for at least 10 seconds, let go and allow your TV to restart. You should see an initial setup screen when it powers on again.

2- Tighten Loose Connections

If you have encountered a problem where your Hisense TV is showing a red light blinking nine times, it could be because of loose connections. 

Sometimes, frequent use over time can loosen the cables or connectors inside the TV, which may cause power loss or malfunction. 

When this happens, the machine automatically switches off to prevent further damage, and the red light blinks nine times to indicate what’s wrong with it. 

Fortunately, fixings are easy – often, all that is required is tightening any loose connections until they become secure again. 

This process involves checking all cables and connectors inside the device and ensuring they are firmly in place. 

If everything else checks out fine, then there should not be any more issues with your Hisense TV ever again!

This process will only take a few minutes and can often solve the problem of the red light blinking nine times.

 It is worth noting, however, that although fixing the loose connections may be an effective solution in the short term, it is not a permanent fix. 

Suppose you continue to experience the issue of the red light blinking nine times. In that case, it could indicate more severe issues like a malfunctioning power supply or damaged internal components. 

In these cases, you may need help from a professional for further assistance.

3- Use Different HDMI Cable

If your Hisense TV is showing a red light blinking nine times error on its screen, it may be due to a problem with your HDMI cable. 

“Issues with HDMI cables such as damage and sparking or their old age can cause the red light blinking nine times issue to appear on your television screen.” 

This error could mean that there is an underlying problem, and you should immediately take action to resolve it. 

The easiest way to troubleshoot the red light blinking nine times issue is using another HDMI cable for your Hisense TV.

In case you face connectivity issues, here’s what you can do: 

  1. Turn off your Hisense TV and unplug it from the power source. Unplug the current HDMI cable from the device connected to it and your television.  
  2. Connect a new HDMI cable to your TV and the device.  
  3. Plug your TV back into

If your TV is experiencing the red light blinking nine times issue, you can fix it using a different HDMI cable. 

A different wire should work if a faulty or old HDMI cable causes the problem. However, suppose there is still an issue even after connecting with a new wire. 

In that case, it could mean that there are deeper problems within your television, and you should get professional help from an experienced technician to diagnose and repair the problem.

4- Use Different Power Cable

If your Hisense TV is experiencing a red light blinking nine times, the issue is likely related to the power cable. 

A faulty, sparking, or old power cable can cause a variety of problems for your television set, including the red light blinking nine times.

 However, there is good news as this issue can usually be easily fixed by simply replacing or using an additional power cable with your TV. 

To rectify the problem, you should always check out the power wire you are using to connect your TV to its electrical source for any signs of damage like frayed wires or physical injuries on the cable. 

If you find any flaws, replace it completely with a new one. If not, try using another cord to ensure this wasn’t caused by issues within other parts of your tv set instead.)

You must use a high-quality power cable when connecting your Hisense TV to a power source. 

This will help ensure a stable and safe connection with the power source, which is essential for the proper functioning of your television. 

When buying the power cable, look for one with thick and sturdy insulation, which will give you maximum results. 

Suppose your TV is still showing red light blinking nine times after trying another power cable. 

In that case, this might mean a problem with some other component of your television,, so it may be wise to get professional help to diagnose and repair the issue.

5- Update Your TV’s Firmware

It is recommended that you update your Hisense TV’s firmware if it indicates red blinking light with a 9-times blink frequency. 

The firmware is the software that controls its basic functions and performance. 

Resolving any issues with the software before its performance goes for a toss is essential. 

However, one of the most common reasons there may be a red blinking light on your TV screen is an issue with the firmware update. 

You need to keep certain things in mind while updating the firmware on your Hisense TV to avoid any interruptions during this process that might cause trouble later on, like failing to perform or having issues with functioning smoothly. 

Here are the steps to update your TV firmware: 

  1. Turn on your TV, go to its main menu, and look for the “Settings” option. 
  2. Find the “Software update” or “Firmware Update” option, and select it, if there is one available. 
  3. Follow any on-screen instructions to download and install the new software. 
  4. Wait for the updates to finish, and restart your TV when prompted.

It’s important to remember that updating the firmware on your TV can take some time, so you must not interrupt the process. 

Once the update is complete, your television should return to normal functioning again. 

6- Change HDMI Port

If you see your Hisense TV showing a red light blinking nine times, it may indicate a problem with the HDMI port. 

The HDMI port is an essential gateway that allows external devices, such as Blu-ray players, game consoles, or streaming devices, to deliver high-definition video and audio signals to the television set. 

However, over time the HDMI port can develop issues because of wear and tear or sparks, which create problems in how well it connects to other electronic components of your TV. 

A damaged HDMI socket can lead to issues like reduced video quality on-screen accompanied by no sound or an unstable connection that frequently gets disconnected and reconnected continuously. 

When you notice a lighting signal flashing nine times on your Hisense Television set, the best way forward is to detect what caused it before doing anything further.

In some cases, if the HDMI port is not visibly damaged but you are experiencing issues with your HDMI connection, several steps can be taken to troubleshoot the problem. 

One effective solution is to use a different HDMI port on your Hisense TV. 

Most modern TVs have multiple ports for HDMI cables and switching ports typically resolve problems so it could be one step you can take first before trying any other methods to fix your issue. 

First, ensure all devices connected to the current hdmi port are unplugged, and then turn off the tv before connecting the new hdmi device to a different port. 

Then try turning both the tv and device on.

7- Disable HDR Setting

If you are experiencing a problem where your Hisense TV’s red light blinks nine times, it is likely due to an issue with the TV’s HDR (High Dynamic Range) setting. 

This can be frustrating as it may prevent you from fully enjoying your movie or TV show experience. 

However, do not worry because we have a solution to this issue that can help you improve your viewing experience and eliminate frustration. 

By first disabling the HDR Setting on your Hisense Television, you will be able to fix this problem. To disable the HDR setting on your Hisense TV, you must access its menu first.

In addition, not all content is created with HDR in mind, and some may not be optimized for this type of display. 

When that happens, the TV may have trouble properly displaying HDR images or video, resulting in the red light blinking nine times when you try to watch it. 

Turning off the HDR setting on your TV will allow it to work correctly with standard dynamic range material without any issues. 

While doing so, remember that you will likely be unable to enjoy the full benefits of watching high-quality HDR content.

8- Bad Power Supply or Capacitors 

If your Hisense TV shows a red light that blinks nine times continuously, it can indicate an issue with the power supply or capacitors. 

A bad power supply or faulty capacitors may lead to malfunctions in your Hisense TV and show an error indicated by the red light blinking nine times. 

You must replace or check the power supply or capacitors on your Hisense TV to solve this problem.

The step-by-step procedure is as follows: 

  1. Turn off your Hisense TV and unplug it from the power supply. Go to the back panel of your TV and find the power supply or capacitors.
  2. Carefully remove the screws that hold these parts in place. Check for any damage on the power supply or capacitors, such as leaks, bulges, or corrosion.
  3. If there are damaged components, replace them with new ones; otherwise, reattach them and secure them with screws.
  4. Plug your TV back into a power source and turn it on again.

By replacing or checking the power supply or capacitors, you should be able to resolve the red light blinking nine times issue and get your TV back to normal operation. 

However, if the problem persists, there could be a more significant issue with your TV that requires professional repair. 

In that case, you should contact Hisense customer support for further assistance. 

Handling the power supply or capacitors with care and following the correct procedure for replacing them is essential. 

Attempting to repair your TV without proper knowledge or tools can result in further damage and may even pose a safety hazard. 

9- How to Contact Hisense for Warranty Claims

If you are facing the issue of a Hisense TV red light blinking nine times, it can be very frustrating and confusing. 

However, finding an answer to this problem could depend on whether your TV is under warranty. 

If your TV is still protected by its warranty, contacting the Hisense customer support team or the company will be ideal for assisting you with any problems. 

Depending on the circumstances, they will be able to diagnose what’s wrong with your appliance and might even repair or replace it if needed.

On the other hand, if your Hisense TV is not under warranty and you need to get it repaired, you will have to contact an experienced technician. 

The technician will be able to diagnose the issue and provide a quote for the repairs, along with telling you which parts will need to be replaced. 

It is important that regardless of whether you are contacting customer support or a technician, you provide them with as much information about the problem as possible. 

This step will help them diagnose and solve your issue faster and more accurately. 


From a power cycle to disabling the HDR setting, to using a different HDMI cable and updating the TV’s firmware, to changing the HDMI port and tightening loose connections, to even a potential problem with the power supply or capacitors.

Each of these solutions has the potential to resolve the issue and restore your TV viewing experience. 

It is always recommended to keep your TV’s firmware up-to-date to function optimally. Overall, there is no need to panic if you are experiencing this issue on your HisenseTV. 

If none of these solutions work, you should consider contacting Hisense for warranty claims. Their customer service team will be able to assist you in resolving this.

Related FAQs

How do I soft reset my Hisense TV without a remote?

Here are the steps to soft reset a Hisense TV without a remote: 

  1. Locate the physical power button on the TV, usually at the back or side of the device. 
  2. Turn off your TV using this button, then unplug it from its power supply for approximately 30 seconds. 
  3. Plug your television set back in and turn it on with the physical power button.

If the soft reset doesn’t fix your TV’s software issues, you may need to try a factory reset, typically by pressing a combination of buttons on the TV or using a service menu. 

The procedure for accessing the service menu and performing a factory reset might change depending on the model of your Hisense television.

So it is recommended that you refer to your TV’s user manual or contact Hisense customer support for further help.

Can I control my Hisense TV with my phone?

You can command your Hisense TV using your phone and a mobile application. 

Modern TVs, including those by Hisense, have a mobile application that lets you control the TV with your smartphone. 

The app is typically called “Hisense Smart TV” or any such thing, and it is available for download from the Apple App Store or Google Play Store, depending on your phone’s operating system. 

After downloading the app, you may use your smartphone as a remote to operate different TV functions, like power on/off, volume control, and channel selection. 

Some applications may also provide access to additional features like streaming content directly onto your television screen.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top