Hisense TV Red Light Blinks 8 Times [Easy To Fix, Proven]

I recently faced a problem with my Hisense TV, where the red light blinks eight times. 

I was initially worried and did not know what to do, but after some research into this issue, I found it is quite common and easily fixable. 

After taking matters into my hands and fixing the problem myself, I wish to share my experience with others facing the same issue. 

“The red light flashing eight times on a Hisense TV indicates that there is an issue with its power supply,” which made me realize that something had to be done about it before I wanted to get my TV running again.

So, I unplugged the Television from the wall outlet and removed its back cover to check for any obvious problems,” which I then noticed were some bulging capacitors–a clear sign they needed replacing.” 

“I ordered replacements for these capacitors and waited for them to arrive before reconnecting my television set,” which now functions perfectly fine once more.”

While fixing the TV, I noticed some of the capacitors were faulty, so I replaced them and reassembled everything. 

Afterward, I plugged it back into the wall outlet to see if it would work properly. 

As a result, my delight knew no bounds when my Hisense TV turned on without any issue and did not blink red eight times anymore. 

Seeing my troubles fixed gave me immense happiness and financial savings since I did not need to call a repairman.

Step By Step Process To Fix This Problem:

1- Power Cycle Your Hisense TV

2- Tighten Loose Connections

3- Use Different HDMI Cable

4- Use Different Power Cable

5- Update Your TV’s Firmware

6- Change HDMI Port

7- Disable HDR Setting

8- Bad Power Supply or Capacitors 

9- How to Contact Hisense for Warranty Claims

How To Fix Hisense TV Red Light Blinks 8 Times 

1- Power Cycle Your Hisense TV

If you have encountered a red light that blinks eight times on your Hisense TV, it is advisable to reset the TV by performing a power cycle. 

For example, if your Television shows this error code frequently because of overuse, the price will be required to take steps to resolve the issue and make the TV functional; the most effective way for this purpose is by unplugging it from its power source for a few minutes and then plugging it back in. 

This helps the Television reset overheating, and sues, including problems with overheating or outdated software, or internal component issues.

If your TV is likely an issue, your TV will likely have a more serious problem. In such a case, you will probably have to seek help from an expert or take the TV to a repair shop. 

An expert technician will be anginose and fix the problem for you and estimate costs, so you know exactly what to expect.

 It is important to remember that using your TV too often can you must taketh is why you must reduce this, such as reducing brightness and contrast settings, avoiding exposing your Television to direct sunlight, allowing it time to cool down after use before turning it off, etcetera.

2- Tighten Loose Connections

When you’re facing the problem of a red light blinking eight times on your Hisense TV, the issue may be due to loose connections within the TV.

 Loose connections can cause the TV to have trouble connecting with its power source, leading to the red light blinking eight times. 

Fortunately, this problem can often be easily fixed by tightening any loose connections within the TV. 

You must first locate their source to tighten these loose connections on your Hisense TV. 

This may involve removing the back panel of the Television or simply checking all connectors between it and its power supply. 

Once you’ve found a connection that is not tight enough, tighten it until it stays in place carefully without damaging any other components of your TV.

Wearing gloves when handling your TV is always a good idea because this will protect your hands from any sharp edges or hot components. 

Suppose you are not confident in tightening the connections on your Hisense TV. 

In that case, it is advisable to seek help from professional technicians who can quickly and easily identify and fix the problem for you and give you tips on how to prevent such issues in the future.

3- Use Different HDMI Cable

If your Hisense TV has a blinking red light that blinks eight times, it could mean something is wrong with the HDMI cable you are using. 

You can easily solve this problem using another high-quality HDMI cable from an electronic store near you or online. 

If you do not have another high-quality HDMI cable at hand, then go ahead and buy one from any local electronics store or online, as long as it supports your Hisense TV.

Once you have bought a new HDMI cable, simply connect it to your TV and the other device, such as your cable box or Blu-ray player. 

If the red light stops blinking on its own, you are confident that the problem was only with the HDMI cable. 

If it continues to blink, there is a probability of a problem with your TV. 

You need assistance from an experienced technician or take your TV to a repair shop immediately. 

It is necessary to remember that HDMI cables can be damaged in numerous ways, including physical damage, sparks, or even just over time due to wear and tear. 

If you notice any damage on your HDMI cable, replace it as soon as possible to prevent further problems and issues in the future.

4- Use Different Power Cable

When the red light on your Hisense TV blinks eight times, it can indicate a problem with the power cable connected to your Television. 

This issue may occur when the power cord gets damaged or wears out over time, disrupting the electrical current and blinking red lights. 

To fix this problem, you will need to use or replace the power cord for your TV.

 It is important to choose a new one with high-quality material that is durable and made specifically for your type of Television. 

When installing the new cord, it’s also essential that you do so properly to ensure that it provides stable and reliable electricity flow without disruptions.”

5- Update Your TV’s Firmware

There is a likely chance that your Hisense TV’s red light blinking eight times could indicate some issue with the Television’s firmware update. 

This error code can occur because of numerous problems, including outdated firmware, corrupted firmware updates, or even a bug in the TV’s software. 

Thankfully, there is an easy solution to fix this difficulty and get your Television back up and running. The first step in solving this issue is to update your TV’s firmware. 

Updating your Hisense TV’s firmware is a simple process that can be done by following a few basic steps. 

First, you should check if any updates are available for the Television by checking the Hisense website or by looking at your device’s settings. 

It is important to remember that updating your TV may take some time, so patience is advisable while letting the process finish. 

It uses dynamic data tags to show wait time: If there is no wait, it shows “No Wait.” 

Else it will display “Wait” and estimated waiting time accordingly, which changes dynamically whenever users add more information on additional TVs they want repairs. 

This can increase conversion rates as well as inform consumers about all possible options instead of just pushing them toward repair services.

6- Change HDMI Port

If you’re facing a red light blinking eight times on your Hisense TV, this indicates a problem with your HDMI port. 

The HDMI Port is the gateway that allows your TV to receive high-definition audio and video signals from external devices such as Blu-ray players, game consoles, or streaming devices. 

However, the HDMI port can get damaged over time due to sparks, wear and tear, or simply aging. 

A damaged HDMI Port can cause various issues, including reduced video quality, no audio, or an unstable connection that frequently disconnects and reconnects. 

When you see a red light blinking eight times on your Hisense TV, the first step towards fixing the issue is to identify its origin.

If the HDMI port has been physically damaged, you may see obvious signs of damage, such as bent or broken pins. 

In such a case, you would have to replace the HDMI port or even the entire TV, depending on the damage’s severity. 

However, if your HDMI connection is not visibly damaged but you are still experiencing problems with it, there are several steps that you can take to troubleshoot the issue. 

One effective solution is to use a different HDMI port on your Hisense TV. Most modern televisions have multiple HDMI ports, and swapping one for another often solves these types of issues. 

Before switching over to a different HDMI port, make sure that all devices connected to it are unplugged and that your TV is turned off. 

Once everything is ready, connect your device to an operationalHDMI port and power it and your Television back on.

7- Disable HDR Setting

If you face this issue on your Hisense TV, the eight red blinks suggest a problem with your HDR (High Dynamic Range) setting. 

This is a common issue many users face, and it’s usually caused either by an incompatible HDR setting or compatibility issues between the TV and the device connected to it.

The reason for the eight red blinks displayed by the Television when you try playing HDR content is that it cannot deliver a quality viewing experience because of improper settings. 

To correct this, we recommend disabling HDR on your Hisense TV.

Here’s what you need to do:

1.  First, turn off your Hisense TV and unplug it from the power source. 
2. Wait a few seconds before plugging it back in, then turn on the TV and go to the “Settings” menu. 
3. Scroll down to “Picture Settings” and select “Advanced Picture Settings,” then go to the “HDR” option and change its setting from Auto to Off. 
4. Finally confirm the changes and exit the settings menu.

By disabling the HDR function on your Hisense TV, you can continue using it without any disruptions or issues related to HDR compatibility. 

“Keep in mind, however,” that by turning off the HDR mode, you might compromise picture quality as well, so it’s highly recommended only to do this temporarily until you can fix the issue and enjoy more great viewing.

8- Bad Power Supply or Capacitors 

If a Hisense TV’s red light blinks eight times, it could point to a problem with the power supply or capacitors, which may cause untimely shutdowns or no power at all. 

To overcome this issue, you must evaluate the power supply or capacitors and fix any faulty ones.

Here’s how you can do it:

1.  First, turn off your TV and unplug it from the wall. Locate the power supply unit and capacitors in the back of the TVs. 
2. Check the capacitors for any signs of bulging or leakage. If any capacitors are damaged, they will need to be replaced. 
3. If all seems well with the capacitors, check for damage on the power supply unit – look for burn marks or loose wires if there is anything wrong with it, replace it too if needed. T
4. eat your working units using a multimeter to ensure proper functioning before reassembling everything and putting it back together again.
5.  Lastly, plug in your TV box back in and see if red blinking issue has been fixed!

When performing these steps yourself is uncomfortable, it’s best to seek assistance from a skilled professional. 

Improper handling of electrical components may cause more damage and can be hazardous to your TV. 

9- How to Contact Hisense for Warranty Claims

If you are facing the problem of a red light blinking eight times on your Hisense TV, many things can be done to resolve it. 

First and foremost, check if your TV is still under warranty; if it is, contact Hisense customer support for help. 

The company will either replace the TV or fix the problem for you, depending on your warranty terms. 

You may also get a replacement if their efforts to fix it do not work out for you.

 End However, if your Television is no longer under warranty, you must find an alternate solution. 

In this case, contacting an experienced technician would probably be one of the best options available as he can detect and rectify any issue in your system.

They can help you detect the reason behind your TV’s problem and replace any faulty parts that may have caused its power supply to blink red eight times. 

When you decide to hire a technician, make sure that it is someone who has experience and a good reputation. 

You can seek recommendations from family and friends or look up reviews online before selecting a credible professional.

If there will be payment procedures, ask for an estimate beforehand to determine if the cost would be worth it anytime. 

However, if possible, do not fix this kind of issue on your own, as it is best to always contact technical assistance when needed.

Conclusion

If you are facing the issue of the Hisense TV Red light blinking eight times, then to solve this problem following steps and measures should be taken. 

First, power cycling your TV should be done so that the capacitors can cool down and start working properly again. 

If, even after doing this, there is no change in status, try disabling your TV’s HDR setting or use a different HDMI cable. 

You might also update the firmware of your device or change its HDMI port if necessary.

Related FAQs

Is Hisense a smart TV or Android?

Hisense is a brand of Television that offers both Smart and Android TVs. 

Smart TVs will have built-in internet connectivity, usually including well-known streaming apps like Netflix and YouTube. 

On the other hand, Android TVs run on the Android operating system and give access to the Google Play Store; this enables you to download and install various applications, including games, music, video streaming services, and more. 

You may choose either type depending on your preferences and what you are looking for in Television.

Is Hisense brand TV good?

A Hisense is a highly recognized brand offering multiple TV options at various prices. 

While some models have received mostly positive reviews for their picture quality and features, others have received mixed reviews.

Ultimately, whether consumers think a Hisense TV is “good” depends on their individual preferences and budget.

It’s recommended to research different models and read feedback from various sources to see if one would suit your needs and expectations.