Hisense TV Red Light Blinks 5 Times [Easy To Fix, Proven]

When I first encountered a red light blinking problem in my Hisense TV, I was devastated since it was the first time that something like this had happened to me.

I didn’t know what to do, but I was determined to fix the issue and get my TV back up and running, so I rolled up my sleeves, did some research, and got to work. 

Through trial and error, I eventually discovered the cause of the problem and consequently fixed it. Now when anyone faces this kind of issue with their TV, they can contact me for help. 

In this article, I will take you through all the experiences that helped me discover why the red light blinked on my Hisense TV. 

Along with sharing everything that happened during the process, I hope all these tips will help you fix your problem set as well!

When you turn on your Hisense TV, the red light on the front of the device blinks five times to indicate an issue with the TV. 

This phenomenon is a common problem that many Hisense TV users face and can be caused by several reasons, such as power surges, overheating or a firmware issue. 

It is important to understand why your Hisense TV is blinking red lights number 5 if you want to diagnose and fix the problem. 

Failing to address this problem can further damage your television and lead to costly repairs. 

If you are experiencing this issue with your Hisense TV, do not worry! This article will guide you through the basic causes and steps to resolve malfunctioning issues. 

Whether you are tech-savvy or not, we have all information here for fixing your televisions again.

Step By Step Process To Fix This Problem:

1- Power Cycle Your Hisense TV

2- Tighten Loose Connections

3- Use Different HDMI Cable

4- Use Different Power Cable

5- Update Your TV’s Firmware

6- Change HDMI Port

7- Disable HDR Setting

8- Bad Power Supply or Capacitors 

9- How to Contact Hisense for Warranty Claims

Hisense TV Red Light Blinks 5 Times [Easy To Fix, Proven]

How To Fix Hisense TV Red Light Blinks 5 Times 

1- Power Cycle Your Hisense TV

If your Hisense TV is displaying a red light flashing five times consecutively, you must check the television’s power supply, as it is most likely facing some sort of malfunction.

If you notice that your Hisense TV has a red light blinking for five continuous seconds, this might be due to an issue with the television’s power supply. 

This frequently occurs due to overuse, which can cause the TV to overheat and shut down. 

However, there is good news! This problem can often be fixed by simply performing a power cycle on your TV. 

A power cycle involves unplugging the device from its electrical outlet and waiting at least 30 seconds before plugging it back in again. 

Performing a power cycle on yourHisenseTV will help reset its power supply and usually resolves any issues causing the red light to blink continuously for 5 seconds.”

If the red light on your TV blinks five times after you’ve plugged it back in, you can try unplugging it for a longer time, such as several minutes, before turning it back on again.

However, in many cases, simply restarting your TV is enough to fix the issue. 

You must remember to take breaks and allow your TV to cool down after extended use because this will help prevent future issues from occurring and also help preserve the life of your television set.

2- Tighten Loose Connections

If you’ve encountered a red light that blinks five times on your Hisense TV, it’s likely a sign of loose connections, which is an issue with the internal workings of your television.

Waist Trouser Woman Black Faux Leggings Denim Vogue Fashion Jeans Hands High Waist Soaks Nudie Skinny Mirmidons Quality Fashionable Yoga Long Vintage Clothing. 

Any issues, including physical damage to the television set or loose connectors between components and other devices such as cable boxes or blu ray players, can cause this problem. 

To resolve this issue, locate all cables connecting your TV to other devices and make sure they are connected properly.‍‍

If you find a loose cable, unplug it from the TV and other devices and then plug it back in securely. 

You may need to seek help from an experienced technician or take your TV to a repair shop if tightening the connections doesn’t resolve the issue. 

An experienced technician will have the knowledge and skills to diagnose any problems and will be able to take the necessary steps to solve them. 

They might also be able to see you with a repair estimate so that you know what to expect financially. 

You need to remember that various factors, including physical damage to your television or cables, can cause loose connections. 

If you notice any issues with your television connectivity or cables, you must address them immediately before they worsen further and result in future complications.”

3- Use Different HDMI Cable

If you are facing the issue of a red light blinking five times on your Hisense TV, it is most likely caused due to an issue with your HDMI cable. 

This problem can occur due to damage, spark, or the HDMI cable being old and no longer working well. 

To solve this problem, replace your old HDMI cable with a new one. Using a different HDMI cable usually solves any issues related to red lights blinking on TV screens.

Here’s how to use a different HDMI cable for your Hisense TV: 

  1. Turn off your TV and unplug it from the power source. 
  2. Turn off your disconnectthe current HDMI cable from the tv and the devices connected to Obtain a different HDMI cable and connect it to the tv and the devicetheditist connected to Plug your back into the power ife and turn it on

If the problem is not resolved using a different HDMI cable, it could mean a more severe underlying issue might require professional servicing. 

In such cases, you may contact Hisense customer support service or an experienced technician to diagnose and fix the issue. 

It’s important to regularly check your HDMI cables for any signs of wear and tear or damage to prevent future red lights from blinking five times more difficult. 

If your current HDMI cable is old or damaged, it’s advisable to replace it with a new one to ensure the smooth functioning of your TV.

4- Use Different Power Cable

If you have noticed that the red light is blinking five times on your Hisense TV, it’s likely due to a problem with the power cable. 

This might be due to several reasons, such as damage, sparking, or simply being outdated and no longer working correctly. 

The power cord is essential to your television since it supplies the electric current to all parts of the set. 

If this component fails for whatever reason, you may find yourself without a functioning TV if you do not take immediate action. 

If you have checked carefully and found no visible signs of damage on the cord itself, it is best to replace it regardless because cables tend to fray over time, even when kept in good condition.

For the replacement of the power cable, follow these steps:

  1. Firstly, turn off your TV and unplug it from the wall outlet. 
  2. Secondly, locate the old power cable that connects your TV to the wall outlet and disconnect it. 
  3. Next, securely connect a new power cable to your TV and wall socket. 
  4. Lastly, you can turn on your television set to check whether the red light blinking issue has been resolved.

When your power cables are nearing the end of their lifespan, they may cause trouble with your TV. 

It is recommended to replace them with new ones whenever possible because this will eliminate any issues. 

Ensure you buy a new cable suitable for your Hisense TV and comply with its technical specifications.

5- Update Your TV’s Firmware

Here’s how to fix the red light blinking problem if it is related to your TV’s firmware update. 

A faulty or out-of-date firmware can often result in a range of issues for your television, including the red light blinking five times error. 

Check with your TV manufacturer for more information on what to do if you experience this issue. 

It is important that before calling technical support, you have checked and updated your TV’s firmware because an outdated version could be responsible for causing such problems as the Red Light Blinking 5 Times error message appearing on the screen.

If you see a red light that blinks five times on your Hisense TV, it is likely related to the firmware update. 

A flaw or an outdated firmware update can cause various problems for your television, like the blinking red light. 

Fortunately, this issue can usually be fixed by simply updating your TV’s firmware. 

To do so, first, check the firmware version of your television, which you will usually find in its settings or menu screen.

If the current version is out of date or there is an updated one available, and if you wish to fix any issues with that flashing red light, then updating the firmware on your tv is necessary by following manufacturer instructions using either a USB drive or directly from tv menu are easy ways to do this.

6- Change HDMI Port

A Hisense TV will blink a red light five times if there is a problem with the HDMI Port.

 The HDMI port on your television provides easy access to link other devices, such as Cable boxes, Blu-ray players, and gaming consoles. 

Problems with the HDMI Port may range from physical damages or sparks to wear and tear due to repeated use. 

One of the first steps you can take to resolve this issue is to use a different HDMI Port on your Hisense TV.

Here’s what you need to do to fix the issue: 

  1. Turn off the TV and all connected devices. Unplug the HDMI cable from the existing HDMI port. 
  2. Locate an available HDMI port on your television and plug the cable into it. 
  3. Turn on the TV and other devices.

If the issue persists even when using a different HDMI port, you might wish to consider replacing the HDMI cable. 

Over time, cables can get torn or simply stop working or functioning properly. 

Replacing the cable can help ensure your TV has a reliable connection and improve its overall performance.

7- Disable HDR Setting

If a Hisense TV’s red light blinks five times, it indicates a problem with the HDR (High Dynamic Range) setting. 

HDR improves the colour and contrast of the picture on the TV, but if it is causing some issues and needs to be disabled, you might want to spruce up your knowledge about how best to set up your device.

To resolve this problem, you may follow these simple steps to disable the HDR feature on your Hisense TV: 

  1. First of all, power on your TV and go to the “Settings” menu. 
  2. Select the “Picture” or “Picture Settings” option from there. 
  3. Then, look for the “HDR” or “High Dynamic Range” option and switch it off. Once done, save changes by selecting “OK” or “Save.” 
  4. Lastly, turn off your TV again and then turn it back on to see if the red light blinking has been resolved.

If the issue persists even after disabling the HDR setting, your TV could have a deeper problem. 

In that case, you should contact Hisense customer support for additional help and assistance. 

It is important to remember that turning off the HDR feature may compromise the quality of the picture on your TV, but it is a straightforward fix for resolving the red light blinking error.

 If you wish to keep using the HDR feature, it may be worth looking into other potential causes of trouble, such as loose cable connections or software errors in your TV.

8- Bad Power Supply or Capacitors 

Hisense TV’s red light blinks five times to inform you about a power supply or capacitor problem. 

The issue is usually caused by defective capacitors or the power supply, which restricts your TV from receiving enough energy to function properly. 

The blinking red light indicates that the TV cannot get regular power and will not turn on. You must either replace or diagnose your Hisense capacitors/power supply to fix this.

Here is a step-by-step guide to help you with it: 

  1. Unplug the TV from its power source and switch it off. 
  2. Remove the back cover of the TV to access the power supply board, which is usually located at the rear of the television and can be accessed by removing or flipping up the top or bottom panel. 
  3. Check all capacitors on the power supply board for signs of damage, such as leaking or bulging. 
  4. If any damaged capacitors are found, you must replace them with new ones you can purchase from an electronics store or online. 
  5. However, suppose they are not responsible for any issues. 
  6. In that case, you may need to replace or rebuild your entire power supply board completely because it is a complex process better left in professional hands.

If you wish to fix the red light blinking problem on your Hisense TV, change the faulty power supply or capacitors as a first step. 

If you want to try it yourself, be aware that doing so can result in injury and is not recommended if you are uncomfortable. 

It is best to seek help from a professional if needed instead.

9- How to Contact Hisense for Warranty Claims

If you see a red light blinking five times on your Hisense TV, it means there is an issue with the television, and it will not start properly. 

If your TV is still under warranty, contacting customer support or the company for a replacement or repair is recommended. 

Your advantage if your TV is under warranty is that you can get it fixed or replaced at no cost, saving you time and money in the long run. 

“You can also claim your TV since of issue, and the company will take care of it.”

When you hire an experienced technician, they will be able to identify the root cause of the problem and take the necessary steps to resolve it. 

They may also provide you with a repair estimate so that you know what to expect regarding cost. 

It is important to remember that fixing a TV that is not under warranty can be expensive but could still be worth it if you want to continue using your television. 

If DIY is more your style, you can also troubleshoot the issue yourself. 

There are numerous reasons why your TV’s red light may blink five times, including a malfunctioning power supply, a damaged main board or a problem with the firmware.

 You might need surgical equipment and parts for repairing the TV, which can be risky, so ensure all safety precautions are taken before working on it.” 

An experienced technician will have the knowledge and skills to identify the root cause of the problem and take the necessary steps to resolve it. 

They may also offer you a repair estimate, so there are no surprises when it comes to payment. 

It’s imperative to remember that repairing non-warranty TVs often costs lots of money but might still be worthwhile if you wish to continue using your set. 


There are several different solutions you can try to resolve this issue. 

Try disabling the HDR setting, using a different HDMI cable, updating the TV’s firmware, changing the HDMI port, tightening loose connections, and checking the power supply or capacitors. 

You should also contact Hisense for warranty claims if these solutions do not work so that they may professionally repair your TV. 

It is important to take all these necessary steps to restore your TV to working condition, as it could indicate damaged or malfunctioning parts. 

If you are unsure how to perform any of these troubleshooting techniques on your own or if there is still an issue, it is best to seek professional help for a safe and efficient repair.

Related FAQs

Can you factory reset without losing?

It all depends on how you define “losing.” If you mean losing personal data such as photos and documents, the answer is typically no. 

A factory reset will typically erase all your data and return the device to its original state before you purchase it. 

The best way to protect your data is by backing it up before performing a factory reset. Suppose you mean losing the device’s operating system or software. 

In that case, a factory reset usually does not cause you to lose it, as reinstalling the original software or operating system is part of the standard factory reset process.

Does factory reset solve all problems?

A factory reset will not solve all your problems since restoring a device to its original state when it was first purchased can help resolve software-related issues such as slow performance, app crashes, and other software bugs. 

It should also be noted that a factory reset erases all data stored on the device, so before going for one, back up your files.

What happens if you interrupt a factory reset?

When you interrupt a factory reset on a device, the reset process can fail to complete successfully, and the device might become inoperable or experience issues. 

The severity of the damage will generally depend on the type of device and at which point during the reset process it was interrupted. 

It is recommended that you ensure your device is fully charged and connected to a stable power supply before performing a factory reset so that it does not get interrupted during the process.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top