Hisense TV Red Light Blinks 2 Times [Easy To Fix, Proven]

A frustrating experience is what I recently had when my Hisense TV was displaying a red light that just wouldn’t go away even though I was busy watching my favorite show.

 To fix this problem, I decided to find out more about it and solved it successfully. 

I am sharing everything with you in case you are also stuck with this issue of your Hisense TV giving two red blinks. 

This can happen for various reasons, but taking steps will help solve it easily.

In this article, I will take you through my journey of fixing the red light blinking two times and teach you the tips and tricks I learned along the way.

If you have noticed that your Hisense TV’s red light blinks twice on the front panel, you might wonder what could be causing this issue.

To resolve such an issue, it is important to understand what meaning two blinks hold and how to fix their issue easily by following simple troubleshooting steps. 

Hisense TV Red Light Blinks 2 Times [Easy To Fix, Proven]

Step By Step Process To Fix This Problem:

1- Power Cycle Your Hisense TV

2- Tighten Loose Connections

3- Use a Different HDMI Cable

4- Use a Different Power Cable

5- Update Your TV’s Firmware

6- Change HDMI Port

7- Disable HDR Setting

8- Bad Power Supply or Capacitors 

9- How to Contact Hisense for Warranty Claims

How To Fix Hisense TV Red Light Blinks 2 Times 

1- Power Cycle Your Hisense TV

If you notice a red blinking light on your Hisense TV appearing twice a row, it is likely because of an overuse issue. 

To resolve this issue, perform a “power cycle” on your device. 

A power cycle simply requires you to unplug your television from its electrical source for several minutes before reconnecting it and powering it back on. 

This simple process often fixes any issues with the red light blinking two times and helps to reset your TV without failure.

Here’s how you can perform a power cycle on your Hisense TV:

  1. First, turn off the TV by pressing the power button.
  2. Then, unplug the television from its power source and wait for at least two minutes. 
  3. Lastly, plug it back into the power supply and turn it on again.

If the problem persists after performing a power cycle, it could indicate a more serious issue that necessitates professional repair. 

In such cases, you can contact Hisense customer support or an experienced technician to diagnose and fix the problem. 

To prevent the red light blinking two times issue from occurring again, it is essential to avoid overusing your TV. 

2- Tighten Loose Connections

If your Hisense TV has a red light blinking two times, the loose connections are likely causing performance problems, such as sound and picture quality degradation. 

In some cases, they might even prevent your television from turning on. 

When this happens, you need to tighten the loose connections to resolve your TV issues and bring it back up and running properly.

In case you have encountered any issues with the loose connections of your Hisense TV, here is a step-by-step guide on how to fix it: Turn off the TV:

  1.  Locate the power button on your TV and press it to turn it off. 
  2. Find the power cord and unplug it from the electric source. 
  3. Look for any loose connections in the back of your TV. 
  4. You might need to remove its cover before accessing these connectors. 
  5. Tighten each connection securely without damaging them as well. 
  6. Reassemble all parts together if required after tightening all loose connections securely using a screwdriver. 
  7. Plug in your TV again. Turn it back on by pressing its power button. Check that no red light blinks twice, and everything is fine now. You may choose one of these two ways to fix the problem, but don’t over-tighten or damage any part!

By fixing the loose connections on your Hisense TV, you can fix performance issues and stop the red indicator from blinking two times. 

By doing this, you can enjoy all of your favourite television shows and movies with optimal visual quality and sound. 

3- Use Different HDMI Cable

If your Hisense TV shows a red light blinking two times, the issue may have something to do with the HDMI cable. 

Damaged or old HDMI cables might cause various problems for your TV, including the flashing red light. It can often be easily fixed by using a different HDMI cable instead. 

Affected devices should be checked first to ensure they function properly and replaced if not. 

If all other devices appear functional but still see no picture on your screen when watching television, you may want to check the HDMI cable between them. 

Look for any signs of damage, such as frayed wires or physical harm to the cord. 

Replace immediately if necessary; otherwise, try another option until you find one that works best for your situation.

With this, you can determine whether the issue is with the cable or another TV component. 

It’s important to use a high-quality HDMI cable when connecting your Hisense TV to another device; this will help ensure you get the best possible picture and sound quality from your television. 

Look for a cable with a high-speed rating and a gold-plated connector for the best results.

4- Use a Different Power Cable

If your Hisense TV shows a red light blinking two times, it could be due to an issue with the power cable. 

This occurrence may have been caused by many reasons, such as damage to the power cord, sparking, or if the latter is old. 

You may need to use or change a different power cord for your Hisense TV to resolve this problem. 

Using or changing another power cord will usually solve this issue on your Hisense TV and make it work again properly.

When you want to use or replace a different power cable for your Hisense TV, there are some steps that you need to follow: 

  1. Turn off your TV and unplug it from the power source. 
  2. Continue disconnecting the current power cable from the TV and the wall socket.
  3. Then, connect a different power cord to the TV and wall socket before plugging back in your device and turning it on again.

If the issue persists even after using a different power cable, it might indicate a severe problem that needs professional repair. 

In such cases, you can contact Hisense customer support or an expert technician to diagnose and fix the problem. 

To prevent the red light blinking two times issue from recurring in the future, it is best to check your power cables periodically for any signs of damage or wear and tear.

5- Update Your TV’s Firmware

A flashing red light on your Hisense TV could also mean a problem with its firmware update. 

It is the software that runs all its operations and functions, so if it’s outdated or corrupt, it may result in issues like the flashing red light. 

To correct this difficulty, you should update your TV’s firmware to resolve the problem and improve overall performance.

Here’s what you need to do to update your TV’s firmware: 

  1. Turn on your Hisense TV and head to the “Settings” menu. Select “Software Update” or “Firmware Update,” if offered. 
  2. Check for any available updates and follow the onscreen instructions to download and install the latest firmware. 
  3. Wait for the update to complete, restarting your TV when necessary.

It is important to note that updating the firmware can take several minutes to an hour.

Make sure that your TV is connected to a power source and not interrupted during the update process by ensuring that it is not turned off or disconnected from a power supply at any time. 

If you experience the red light blinking twice on your Hisense TV even after updating the firmware, you may need professional assistance.

6- Change HDMI Port

When a Hisense TV blinks red twice consecutively, it indicates an issue with the HDMI port. 

The problem could be due to damage, sparks, or because the port is outdated and needs to be replaced. 

To fix this issue without spending money on repairs or replacement, you may try using a different HDMI port, as suggested by the manufacturer. 

Switching ports will help resolve the problem without spending money on repairs or replacements. 

Here’s how you can do that:

First, unplug your cable if connected from the problematic port and then plug it into another one available on your TV set. 

All your TV’s ports should be tried one after another to see which works best for connecting your device and enjoying the content.”

If the cable is damaged, it may cause issues with the signal and result in the red light blinking two times. 

You can inspect the cable for visible damage and replace it if necessary. Another possible cause of the problem could be your TV’s outdated HDMI port. 

HDMI technology has evolved considerably, and older TVs may not be compatible with newer devices. 

In such cases, you can use an HDMI to DVI adapter to connect your device to your TV. 

This adapter will allow you to use a DVI cable to connect your device to the TV to enjoy your content without any problems onscreen. 

7- Disable HDR Setting

If you are experiencing a red light blinking two times on your Hisense TV, it is likely because of issues with the HDR setting. 

HDR stands for High Dynamic Range, which enhances the colour and contrast in images to provide a more vibrant and realistic picture for viewers. 

Although this feature improves the quality of your picture significantly, some devices may not be compatible with your TV when it has the HDR setting turned on. 

This can result in connectivity issues between them. If you see a red light blinking twice on your Hisense TV, you should first check whether or not the HDR feature is switched on.

For your Hisense TV to disable the HDR setting, turn on the television and use your remote control to access the main menu. 

  1. Search for the “Settings” option and select it. Navigate to the “Picture” or “Picture Settings” options and select it. 
  2. Locate the “HDR” option and turn it off. 
  3. Save any changes, then exit out of the menu.

Now, suppose you successfully resolve the issue and can connect your device to your TV without any hassle by disabling the HDR setting. 

In that case, you can enjoy high-quality video and audio without interruptions. 

However, remember that preventing the HDR setting may give rise to a lower-quality picture on your TV set. 

8- Bad Power Supply or Capacitors 

The red light blinking two times on your Hisense TV indicates a problem with the power supply or capacitors. 

This issue may cause the TV to shut down unexpectedly or not work. You must replace the power supply and/or capacitors to fix this issue or check them for damage.

Here are the steps that you should follow to do so:

  1. Turn off the television and unplug it from the power source. Keep the TV’s back cover open so you can access its internal components. 
  2. Search for any power supply or capacitors damage, such as bulging or leaking.  
  3. If you see any signs of damage, carefully unplug the damaged component and replace it with a new one. 
  4. If all components appear in good condition, use a multimeter to test their voltage and capacitance readings.  
  5. If they fall outside of manufacturer specifications, then you must replace them immediately. 
  6. Reassemble your TV and plug it back in before turning it on again. Check if your issue has been resolved by watching for red blinking lights two times.

While handling the internal components of your TV, it is necessary to handle them with care and follow all safety precautions, like wearing protective gear and unfitting the power source before starting the repair process. 

If you are not confident in your ability to repair your TV independently, it is best to seek professional help from a technician. 

9- How to Contact Hisense for Warranty Claims

If your Hisense TV is giving you a red light blinking two times, this can be frustrating and make you uncertain about what to do next. 

However, the good news is that there are options available to you. 

If your TV is still under warranty, it’s best to contact Hisense customer support immediately so they can assist with resolving the problem, whether that means repairing the television or providing a replacement. 

This is likely your most straightforward solution and will relieve any of the stress involved in finding an expert technician or paying for repairs yourself since Hisense will pay for everything on its end.

If you want to fix your Hisense TV yourself but don’t have the proper equipment or technical know-how, this is a good option. 

When choosing a technician, it is very important that you conduct thorough research and find someone who has an abundance of experience repairing Hisense TVs because attempting repairs on your own may result in further damage to your television if you do not have any prior knowledge of electronic devices or their repair. 

Additionally, keep in mind that taking this option does not mean that you are doomed to failure; many different solutions are available for red lights blinking twice on your TV.


Several steps are needed to troubleshoot and resolve the problem. First, try power cycling your TV to reset the system. 

You can try disabling the HDR setting or using a different HDMI cable if that doesn’t work. 

If that does not solve the issue, update the TV’s firmware and change its HDMI port. Check for any loose connections and tighten them if present.

Further, check for damaged capacitors or power supply in your TV if nothing helps. 

Contact Hisense customer support for help when you have tried all this but cannot fix the issue at hand permanently on your own. 

It is strongly recommended that you take prompt action to address this red light blinking problem as it will ensure superior performance of your TV indefinitely in future.]

Related FAQs

Why is the red light blinking on my Hisense TV?

Red light blinking on a Hisense TV could indicate many issues, such as a malfunctioning power supply, overheating, or firmware updates. 

To troubleshoot the issue, try unplugging the TV from its power source for a few minutes and then restart it to check for any physical damage. 

You can also update the firmware before contacting Hisense support for further help. This may be best in case your problem persists.

Why is my Hisense TV blinking but not turning on?

If your Hisense TV is blinking but not turning on, there could be a few reasons for this: 

  1. Power Surge: A power surge or spike might have caused damage to the TV. 
  2. HDMI Input Issues: If the television is stuck on one specific HDMI input, it might result in the TV blinking and not turning on. 
  3. Hardware Issues: The TV’s hardware, such as the power supply or mainboard, may be faulty and cause the television to blink but not turn on.
  4. Software Issues: The Television’s software or firmware may malfunction, causing it to blink but not turn on.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top